providing the voip phone ywh600-sip protocol with poe fxo

Sell your all new VoIP telephony hardware here. IP phones, routers, switches, gateways or any other VoIP equipment. Only VoIP products sell here.

providing the voip phone ywh600-sip protocol with poe fxo

Postby rob924 » Thu May 19, 2011 4:25 pm

SIP v1 (RFC2543), v2(RFC3261)
Support Route,Two 10/100Mbps MACs
Support T.38(Doing)
IP/TCP/UDP/RTP/RTCP
IP/ICMP/ARP/RARP/SNTP
TFTP Client/DHCP Client/ PPPoE Client
Telnet/HTTP Server
DNS Client
NAT/DHCP Server
Support G.723.1 5.3k/6.3k,G.729,G.711 A-Law、μ-Law audio codec algorithm
Dynamic voice detection Echo cancellation Comfort noise generation
Tone generation and Local DTMF generation and detection according with ITU-T
Settings by HTTP web browser (IE6.0)
Advanced settings by Telnet
Voice prompt
Upgrade by TFTP
2RJ45 Ports,Built-in Router,conference.Auto-provision or up****** by HTTP,FTP or TFTP.
For each YWH600A,It can be register 3-SIP account,all can used as callee at anytime.It also can be slected among these 3-SIP account as caller by dial different dial prefix.
For each YWH600B,it can have 3-SIP account and one PSTN phone number,that means each phone own 4 phone numbers,all can be used as callee at anytime.Fo the caller,these 4 account can be selected by dial different relevant prefix(including switch to PSTN as an ordinary PSTN phone)
YWH600B has a real FXO port to support router call from PSTN to VOIP or VOIP to PSTN.

more information
ZHENGZHOU YUNENG COMMUNICATION CO.LTD | ?????? YUXIN|ipphone|gatway<ATA>|voice|gateway|VOIP|USBPh one|conferenceBox |
msn yunengtongxin@hotmail.com
rob924
 
Posts: 95
Joined: Wed May 18, 2011 12:04 am

Return to VoIP Hardware

Who is online

Users browsing this forum: No registered users and 1 guest



If you want to do free advetise with VoIP, please E-Mail bdmoni@hotmail.com

cron